If your Samsung TV remote is broken, this essay will show you how to fix it. A complete guide on how to fix things. Samsung TV Remote Won’t Change Channel, Samsung TV Won’t Respond to the Remote, TV Remote Won’t Pair, or the Remote Is Blinking Red Light.
You should first attempt diagnosis if your Samsung TV remote is malfunctioning. You might notice, for example, that a button doesn’t do anything when you press it. The remote might not be able to connect to the TV, or the sensor might work. Fixing or troubleshooting the problem will be hard if you don’t know what’s causing it.
There could be a problem with the device, the batteries, the remote, or the TV sensor. The battery should be the first thing you look at to determine what’s wrong. Change the batteries, clean the top edges of the remote, and look at the terminals to get started. If the problem keeps happening, try one of these ideas.
During these steps, you can control your TV using the Samsung SmartThings app on your phone or a keyboard and mouse that works with your TV.
Several ways to fix a Samsung TV whose remote doesn’t work
If your Samsung TV doesn’t respond to the remote, try the following steps to fix it:
Restart your TV
If you restart your TV, the system will be reset, and you can start over.
- Stop watching TV.
- Could you turn it off by unplugging it?
- Just hold on for about 30 seconds.
- Reconnect the TV to its power source.
Try turning it on with the remote and see what happens.
Perform a digital camera test
You can find out if the infrared on the remote is working right with a digital camera test.
- Turn on the camera on your phone.
- Point the remote at the camera’s lens.
- Press one of the remote’s buttons.
- The Infrared eye on the remote should light up on the camera screen to show that it’s working.
If the remote works, the TV’s remote sensor is to blame. If the remote control does not function, it is likely defective. Take into account the possibility of a replacement.
How to fix Samsung TV Remote Sensor
When you look at the remote sensor, check to see if there are any things between the remote and the sensor on your TV. If something is between the two, it will block the infrared signal. You could also try again after restarting your TV. Then, do what the steps above say.
If the remote control does not function, it is likely defective. Take into account the possibility of a replacement. If not, find a reliable person who knows much about Samsung TVs.
Samsung Smart TV Remote Touchpad Troubleshooting
Sometimes, the touchpad on the Samsung Smart Touch Remote might not work as well as it should. The problem could be caused by the calibration level changing all the time. It would be better to re-calibrate the Smart Touch Remote.
- Press the NUMBER key and hold it for three seconds.
- The calibration process will start, and the remote’s LED will flash twice when it’s done.
Don’t touch the touchpad during the calibration process. It’s possible that the touchpad has to be calibrated if the issue persists.
But if the remote stops working, it’s best to get a new one that works with your TV. You can also control any Samsung TV with the Omaic universal remote.
How to fix a Non-Pairing Samsung Remote
If a remote won’t pair, you can fix the problem by resetting it. Here’s how:
- Take out the battery. If you can, try to use fresh ones.
- While taking the batteries out, hold down the power button for at least 20 seconds.
- Press the button that says “on.”
- Switch out the batteries.
- To start the re-linking process, press and hold the Play/Pause and Back buttons simultaneously.
Afterward:
- Point the TV remote at the sensor on the TV.
- Press and hold the Return to Play and Pause buttons simultaneously for at least three seconds.
Your Samsung TV will start to connect to the remote. You will get a message that the remote is working with your TV.
What if the red light on your remote is blinking?
If your Samsung TV remote suddenly stops responding and begins flashing red warning light, you might try one of the following:
- To get started, turn off the set and then back on again.
- The remote must be paired again by performing Step 4 above.
If it doesn’t work, try restarting the remote. First, empty the batteries from their packaging. Then, for the next eight seconds, hit and hold the Power button. Then, try using the remote again after the new batteries have been installed.
FAQ
How do I reset the Samsung TV remote?
- Turn on the TV and press the Home button on the remote control for the Samsung TV.
- Choose Help, then press Enter.
- Choose Self Diagnosis from your remote and then press Enter.
- Find the Reset option, then press the Enter button on your remote.
- To access the protected areas of the TV, you will need either a password or a PIN. Dial the number using the TV’s remote. 0000 is the default code for the PIN if it is not changed. Please remember that it is not valid if you reset your password but can’t remember it. There is a way forward.
- To reset your password, please use one of the ways at the bottom of the page to get in touch with Samsung Customer Care.
- On the screen for factory reset, there will be a warning message.
- Choose Yes using the remote’s directional pad and then hit the Enter key to confirm.
- Please remember that all your settings will be reset to factory defaults except for any network information you’ve already used.
- During a factory reset, the TV may be turned on and off repeatedly to show a configuration screen.
Why isn’t my TV responding to my remote?
Samsung TV remotes that don’t respond to or work with your TV often have shorter battery lives. Check that the remote is aimed toward the screen. The signal could be messed up by other devices, certain kinds of light, or anything that gets in the way of the TV remote’s sensor.
How can I activate my Samsung TV remote?
To turn off the remote:
- A 10-second push of the power button after the batteries have been removed is recommended.
- Try using the remote again after you change the battery.
- See the user manual if you need help getting to the battery compartment.
How can I use my Samsung TV without a remote?
Most buttons for controlling a Samsung TV are on the back of the screen, in the lower right corner. It lets you move the pointer both left and right and up and down. Also, the Samsung TV remote can be turned on by holding the center button for a long time.
Conclusion
When your Samsung TV remote stops working, there are many ways to figure out what’s wrong and fix it. Change the batteries, clean the top edges of the remote, and look at the terminals.
If the red light is blinking and you’re having trouble, try pairing the remote again. You can also fix a broken touchpad by regularly calibrating it. Read how to Fix Sling TV Error Codes to learn more.